Have you ever thought about building your own computer? Actually buying a motherboard and a case along with all the supporting components and assembling the whole thing yourself?

Here are three reasons why you might want to consider taking the plunge:

1. You will be able to create a custom machine that exactly matches your needs.
2. It will be much easier to upgrade your machine in the future because you will understand it completely.
3. You may be able to save some money.

­ In this article, we'll take you through the entire process of building a computer. You'll learn how to choose the parts you will use, how to buy them and how to put them all together. When you're done, you will have exactly the machine that you need. Let's get started.

Decisions, Decisions
Where do we start? Actually putting the machine together is pretty easy, but picking the parts and buying them takes research.

The first step in building a computer is deciding what type of machine you want to build. Do you want a really inexpensive computer for the kids to use? A small, quiet machine to use as a media computer in the living room? A high-end gaming computer? Or maybe you need a powerful machine with a lot of disk space for video editing. The possibilities are endless, and the type of machine you want to build will control many of the decisions you make down the line. Therefore, it is important to know exactly what you want the machine to accomplish from the start.

Let's imagine that you want to build a powerful video editing computer. You want it to have a dual-core CPU, lots of RAM and a terabyte of disk space. You also want to have FireWire connectors on the motherboard. These requirements are going to cause you to look for a motherboard that supports:

• Dual-core CPUs (either Intel or AMD)
• At least 4GB of high-speed RAM
• Four (or more) SATA hard drives
• FireWire connections (possibly in both the front and back of the case)

Then it all needs to go in a case with enough space to hold multiple hard disks and enough air flow to keep everything cool.

With any computer you build, knowing the type of machine you want to create can really help with decision-making.

But before we start building, we need to say one thing about static electricity. Most of the parts you will be handling when you assemble your computer are highly sensitive to static shocks. What that means is that if you build up static electricity on your body and a shock passes from your body to something like a CPU chip, that CPU chip is dead. You will have to buy another one.

The way you eliminate static electricity is by grounding yourself. There are lots of ways to ground yourself, but probably the easiest is to wear a grounding bracelet on your wrist. Then you connect the bracelet to something grounded (like a copper pipe or the center screw on a wall outlet's face plate). By connecting yourself to ground, you eliminate the possibility of static shock.

Each combination of parts is unique. But in general, here are the basic steps you will need to follow when you assemble your machine.

Installing the Microprocessor and RAM
First, you'll need to unwrap the motherboard and the microprocessor chip. The chip will have one marked corner that aligns with another marked corner of its socket on the motherboard. Align the corners and drop the microprocessor into the socket. You don't need to apply any pressure - if it's aligned correctly, it should fall into place. Once you have it in, cinch it down with the lever arm.

Now, you need to install the heat sink. The CPU box will contain a manual that tells you how to do it. The heat sink will contain either a heat sink sticker or heat sink grease to use when mounting the heat sink on the CPU. Follow the instructions closely to install it. To install our heat sink, all we had to do was put it in place, cinch it down with flanges on either side and lock it with a cam. Connect the power lead for the heat sink to the motherboard.

Next, you'll install the RAM. Look on the motherboard for the slot marked "one" and firmly press the RAM module into it. It will probably take more pressure than you'd think to get the RAM into place. Each side of the module should also have a rotating arm that will lock the RAM down.

Now your motherboard is ready to put in the case.